Features & Benefits
Intelligence Simplified
The ACE1000 allows you to easily automate processes and communicate data across your operations on a Linux based operating system for quick and easy application programming.
Connection Versatility Across Operational Technologies
Connect to operational technologies seamlessly and transmit information efficiently with the ACE1000’s extensive common data protocol support combined with our enhanced MDLC protocol.
Interoperable Communication Capabilities
The ACE1000’s unique communication capabilities allow your system to transmit your valuable data over a variety of media including analog/digital two-way radio, dial-up modem, point-to-point microwave, 3G/4G public or private, and Ethernet - simultaneously.
Seamless Configuration
The ACE1000 is easy to install and has a user-friendly configuration tools allowing you to set up your whole system, rather than each unit individually, quickly and easily. The new menu-driven GUI and the “Easy Programming Tool” further reduce the amount of time and money needed for deploying a system.
Rugged and Ready for the Field
The ACE1000 RTU is designed to withstand harsh conditions, unlike the average programmable logic controller (PLC), which is built for the factory floor. Temperature, altitude, and humidity are no match for the ACE1000, which meets IECEx/ ATEX - EXnA IIC T4 (Cat 3/Zone 2) rugged specifications.
Eco-Friendly, Green Performance Features
The ACE1000 offers Low Power and Sleep mode options, ideal for when you’re operating on solar power
Specification Sheet
ACE1000 Remote Terminal Unit Data Sheet
In a new, compact package, the ACE1000 is the Remote Terminal Unit that will facilitate higher reliability and interoperability at a lower cost.
Physical Characteristics
-
I/O Bus, Digital Inputs, Analog Inputs
-
6.3 in. / 160mm (H) x 2.95 in. / 75mm (W) X 4.4 in. / 112mm (D)
-
450 grams (without expansions)
User Environment
-
EIA/TIA 603 Base station, Sinusoidal 0.07mm @ 10 to 30 Hz, 0.035 mm @ 30-60 Hz
-
-400 meters to +4000 meters
-
5% to 95% RH @ 50 degrees Celcius
-
negative 40 Degrees celcius to positive 70 degrees celcius (excluding radios)
-
negative 55 degrees celcius to positive 85 degrees celcius (excluding radios)
CPU Module and Performance
-
Sitara CPU (Cortext-A8)
-
Linux
-
FLASH 256 MB (32 MB for user), RAM 256 MB (16 MB for user)
-
LEDS 4*Main + 1*LAN + RS232 (tx, rx)
-
Coin Rechargeable Batter (at least 20 days)
Communication Ports and Support
-
On board: 10/100 Mb/sec
-
Cellular modem, leased line modem, data radio, broadband radio
-
APX, MOTOTRBO, TETRA
-
MDLC over Serial
-
ModBus (Slave/Master over RS232/RS485 and Ethernet
-
Main board: RS232 (115.2kbps)/RS485 (460 kbps), Half/Full Duplex with/without CD; Plug-In (Optional): Isolated 2 x RS232 (115.2 kbps)
-
Digital MOTOTRBO, Digital Trunked Astro, Tetra
-
LTR Local (via direct connection) and FEP Remote
-
LTR Local (via direct connection) and FEP Remote
-
I O Support and Expansion
-
10 ms
-
Ranges: 0-20mA, 4-20mA, 0-5V; Resolution: 16 Bit; Accuracy: 0.1% of full scale; User-configurable signal smoothing and 50/60 Hz filter
-
8 x AI Isolated, 0-20mA, 420mA or 0-5VDC, resolution:16bit, Accuracy = .1% of full scale, user configurable smoothing, user configurable
-
Wet inputs; Isolated (1500v relative to the CPU) ; De-bouncing filter: 10,20,30,40,50 mSec; Fast counter - 2KHz
-
12 x Wet DI Isolated, 8 x AI Isolated, Wet inputs, de-bouncing filter 10,20,30,40,50mS, fast counter 2KHz, Isolation to CPU: 1500V
-
ML form C ( SPDT) relays
-
Wet inputs; Isolated (1500v relative to the CPU); De-bouncing filter:10,20,30,40,50 mSec; Fast counter - 2KHz
-
Yes
-
Yes
-
Ranges: 0-20mA , 4-20mA, 0-10V; Resolution: 12bit; Accuracy: 0.1% of full scale
-
8 x DO Relay 2.5a, 4 x ML Form C (SPDT), 4 x EE Form C (SPDT), DO Frequency: 10 Hz
Regulatory Specifications
-
UL 60950-1, CSA 22.2-60950-1, IEC 60950-1/EN60950, AS/NZS 60950
-
CFR 47 FCC part 15, subpart B (class A) EN55022:2003 Class A, EN61000-3-2, EN61000-3-3
-
IEC 61000-4-2,
IEC 61000-4-3,
IEC 61000-4-4,
IEC 61000-4-5,
IEC 61000-4-6,
IEC 61000-4-8,
IEC 61000-4-11